So, I bought a CR-10S. From banggood. Why, oh why? Because I have a neighbor who is interested in printing 3D Planes, like those from 3dLabPrint.com. He’s not all that interested in 3D printing.
I wanted to see if a CR-10S could print these unique thin wall prints, and print them reasonably well with little hassle by the operator.
Short answer: Yes.
Longer answer: I did not completely realize this was a bowden printer. The files supplied by 3dLabPrint require some tweaking in retraction. Also, the printer DESPERATELY needs some quieting down. Just a couple of better fans, and a couple of stepper-motor-dampers do a world of good. Maybe $20 in parts, maybe less.
With those caveats, it produces medium good to very good prints.